This is an old revision of the document!
STATUS: Finished / In-Progress
GameCube Mods and Repair
modding and repair of GameCube systems.
Items Needed
Xeno ModChip- Laser assembly
Instructions
- Step 1
- Step 2
NOTES
Laser Eye Assembly always needs the potentiometer tweaked. Measure the resistance across the left leg and bottom right leg
LOWER Ohms = MORE LASER
Start with higher resistance and work your way down slowly.
200 to 500 Ohms is the average resistance. DO NOT GO UNDER 175!!!
- 001 GC laser needs resistance set between 450 - 600
- 101 GC laser needs resistance set between 150 - 250
Examples: Jon's old GC started at 216 and read at 196; Marc's newer GC started at 276 and read at 199
More Information
A youtube or URL etc