modding and repair of GameCube systems.

• Xeno ModChip
• Laser assembly

• Step 1
• Step 2

Laser Eye Assembly always needs the potentiometer tweaked. Measure the resistance across the left leg and bottom right leg

LOWER Ohms = MORE LASER

Start with higher resistance and work your way down slowly.

200 to 500 Ohms is the average resistance. DO NOT GO UNDER 175!!!

• 001 GC laser needs resistance set between 450 - 600
• 101 GC laser needs resistance set between 150 - 250

Examples: Jon's old GC started at 216 and read at 196; Marc's newer GC started at 276 and read at 199

A youtube or URL etc